To Display The Format Of The Set Operation - Hitachi XP P9500 User Manual

To Display the Format of the Set Operation

-help
Displays the format of the set operation.
Examples
Example 1
The following example displays the format of the operation for both a host
and remote management client:
>dlnkmgr set -help
set:
Format
dlnkmgr [Host-Connection-Options] set
vmwrr }
dlnkmgr -l set { -lic
6-20
Value (severity)
Error-level, Warning-level, and Information-level audit log
6
data is collected.
7
-category [[ss] [a] [ca]|all]
Specifies the categories of audit log data to be collected.
Values Indicating Audit Log Data Categories on page 6-20
describes the values that indicate categories of audit log data. The
default is all. If you specify the -category parameter without
specifying a value, all is assumed.
Table 6-5 Values Indicating Audit Log Data Categories
Value
Audit log events of the StartStop category are collected.
ss
Audit log events of the Authentication category are
a
collected.
Audit log events of the ConfigurationAccess category are
ca
collected.
Audit log events of the StartStop, Authentication, and
all
ConfigurationAccess categories are collected.
{ -lb on -lbtype { exrr | exlio | exlbk | vmwmru |
| -iem on [ -intvl Error-Monitor-Interval ]
[ -iemnum Number-Of-Times ]
| -iem off
}
[-s]
| -audlog on [ -audlv AudlogLevel ]
Command Reference
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Explanation
Explanation
Table 6-5