Hitachi XP P9500 User Manual page 87

Valid value
help:
Format
KAPL01001-I The HDLM command completed normally. Operation name
= help, completion time = yyyy/mm/dd hh:mm:ss
>
Example 3
The following example shows how to display the operations that can be
specified by the help operation
>dlnkmgr help help
help:
Format
KAPL01001-I The HDLM command completed normally. Operation name
= help, completion time = yyyy/mm/dd hh:mm:ss
>
offline (Places Paths Offline)
The dlnkmgr command's offline operation places online paths offline.
Specify the paths to be placed offline by specifying a CHA port, single path, or
HBA port WWN.
There must always be at least one online path accessing each LU.
Placing too many paths offline might prevent paths from being able to switch
if an error occurs. Before placing a path offline, use the view operation to
check how many online paths remain. For details about the view operation,
see view (Displays Information) on page
Host-Connection-Options:
[ -a
[ -c CONFIG
[ -f SESSIONFILE | --sessionfile=SESSIONFILE ]
[ -h VIHOST
[ -p PASSWORD
[ -r URL
[ -s SERVER
[ -t CACERTSFILE | --cacertsfile=CACERTSFILE ]
[ -u USERNAME
[ --credstore=CREDSTORE ]
[ --passthroughauthpackage=PASSTHROUGHAUTHPACKAGE ]
[ --portnumber=PORTNUMBER ]
[ --protocol=PROTOCOL ]
[ --savesessionfile=SAVESESSIONFILE ]
[ --servicepath=SERVICEPATH ]
AutoPATH_ID { 000000 - 999999 }(Decimal)
dlnkmgr help { clear | offline | online | set | view }
dlnkmgr help { clear | offline | online | set | view }
Command Reference
Hitachi Dynamic Link Manager User Guide (for VMware(R))
| --passthroughauth ]
| --config=CONFIG ]
| --vihost=VIHOST ]
| --password=PASSWORD ]
| --url=URL ]
| --server=SERVER ]
| --username=USERNAME ]
6-22.
6-7