What To Do For A Program Error - Hitachi XP P9500 User Manual

Executing this command places all the offline paths online.
If any path cannot be placed online due to an error, the KAPL01039-W
message will appear. To ignore such paths and to continue processing, type
y. Type n to cancel processing.
Check the statuses of the paths that cannot be placed online, and resolve the
problem.

What To Do for a Program Error

The following describes what to do to handle errors that occur in an HDLM
program.
on page 5-5
Figure 5-3 Troubleshooting Procedure When a Program Error Occurs
The following shows the procedure for handling a program error by using the
HDLM command (dlnkmgr).
Examining the Messages
Examine the messages that are output to the host syslog. If an error occurs
in an HDLM program, a message is output to syslog. Examine the content of
the message. Messages with error level E (Error) or higher require corrective
action.
Obtaining Program Information
Obtain the information that you need to report to your HDLM vendor or
maintenance company.
Use the DLMgetras utility to collect the error information. For details on this
utility and the information it collects, see
HDLM Error Information on page
Figure 5-3 Troubleshooting Procedure When a Program Error Occurs
shows the troubleshooting procedure.
Troubleshooting
Hitachi Dynamic Link Manager User Guide (for VMware(R))
The DLMgetras Utility for Collecting
7-2.
5-5