Performing A Re-Installation Of Hdlm; Checking The Path Configuration - Hitachi XP P9500 User Manual

>esxcli --server=host-name --username=user-name --
password=password software acceptance set --
level=PartnerSupported
4 Install HDLM on the host.
.
Execute the following command. In the -d parameter, specify the name of
an offline bundle file you copied in step 1.
Repeat this command for each offline bundle file you copied in step 1.
>esxcli --server=host-name --username=user-name --
password=password software vib install -d /any-directory-on-the-
host/online-bundle-file-name
When the installation process has completed, execute the following
command and make sure that the plugin name appears in the command
output:
>esxcli --server=host-name --username=user-name --
password=password software vib list | findstr hdlm
5 Make sure that the SATP claim rule for HDLM has been applied.
.
Execute the following command, and make sure that the claim rule
appears in the command output:
>esxcli --server=host-name --username=user-name --
password=password storage nmp satp rule list | findstr
HTI_SATP_HDLM
6 Restart the host.
.
7 Check the path configuration according to the procedure described in
.
Checking the Path Configuration on page

Performing a Re-installation of HDLM

Before you can re-install HDLM, you must remove the existing installation.
To re-install HDLM:
1 Prepare for HDLM uninstallation by following the directions in
.
for HDLM Uninstallation on page
2 Uninstall HDLM from the host and remote management client by following
.
the directions in
3 Install HDLM on the remote management client and the host by following
.
the directions in

Checking the Path Configuration

HDLM functions, such as load balancing and failover, are only available for
HDLM management-target devices that have more than one active path. After
3-8
Uninstalling HDLM on page
Performing a New Installation of HDLM on page
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for VMware(R))
3-8.
3-15.
3-16.
Preparations
3-5.