Hitachi XP P9500 User Manual page 141

Message ID
KAPL01024-W The specified parameters cannot
be specified at the same time.
Operation name = aa...aa,
parameters = bb...bb
KAPL01036-E The Offline path cannot be
placed online. PathID = aa...aa
KAPL01039-W During the online operation
processing of the HDLM
command, a path that cannot be
placed in the Online status was
detected. PathID = aa...aa
Would you like to continue the
processing of the online
operation? [y/n]:
KAPL01040-W The entered value is invalid. Re-
enter [y/n]:
KAPL01041-E The entered value is invalid. The
operation stops. Operation name
= aa...aa
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Message Text
Messages
Explanation
Details
aa...aa: clear, offline, online,
set, or view
bb...bb: Parameters that cannot
be specified at the same time
Action
Execute help operation of the
HDLM command (dlnkmgr) to
check which parameters can be
specified at the same time, and
then retry. For details on the help
operation, see help (Displays the
Operation Format) on page
Details
The path could not be recovered.
aa...aa: Path ID (decimal
(base-10) number)
Action
Remove the error in the path, and
then retry.
Details
A path that cannot be placed
Online was detected during
multi-path online processing. To
ignore this path and perform
online processing for the next
path, enter y. To cancel
processing, enter n.
aa...aa: Path ID (decimal
(base-10) number)
Action
If you want to continue processing
of the online operation of the
HDLM command for other paths,
enter y. If you want to terminate
processing, enter n. For details on
the online operation, see
(Places Paths Online) on page
6-11.
Details
A value other than y and n was
entered. Enter y or n.
Action
Enter y or n.
Details
Command processing will be
aborted because an incorrect
6-5.
online
8-7