Hitachi XP P9500 User Manual page 155

Message ID
KAPL01148-E An attempt to connect to the
specified server has failed.
Operation name = aa...aa
KAPL01149-E An attempt to connect to the
HDLM driver (HTI_HDLM_SATP)
has failed. Operation name =
aa...aa
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Message Text
Messages
Explanation
cc...cc: Number of paths where
the online/offline operation
was unsuccessful(decimal
(base-10) number)
dd...dd: Number of target paths
for online or offline operation
(decimal (base-10) number)
ee...ee: online or offline
Action
None. For details on the online
operation, see online (Places
Paths Online) on page
details on the offline operation,
see offline (Places Paths Offline)
on page 6-7.
Details
An attempt to connect to the
specified host has failed.
aa...aa: Operation name
Action
Check the host name, user name
or password that was specified in
the HDLM command (dlnkmgr),
and then retry.
Details
The HDLM command cannot
manage HDLM on an ESXi server
because the HDLM driver
(HTI_HDLM_SATP) cannot be
accessed.
aa...aa: clear, offline, online,
set, or view
Action
This message is output when
there is no HDLM management-
target path. If this message is
output when an HDLM
management-target path exists,
execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see
DLMgetras Utility for Collecting
HDLM Error Information on page
7-2.
6-11. For
The
8-21