The Dlmgetras Utility For Collecting Hdlm Error Information - Hitachi XP P9500 User Manual

The DLMgetras Utility for Collecting HDLM Error Information

This utility collects information that is needed to analyze HDLM errors that
have occurred: information such as integrated trace files, trace files,
definition files, and OS information.
Whenever the host is restarted, some of the information that is collected by
the DLMgetras utility will be cleared. As a result, whenever an error occurs,
immediately execute this utility to avoid losing any valuable information.
Format
Execute this utility from the remote management client, in the following
format:
DLMgetras {-s host-name -u user-name -p password [folder-to-which-
collected-information-is-output] [-eventlogtime yyyy/mm/dd | -
eventlogsize {all | maximum-file-length}] | -h}
You can also use lower-case characters as follows:
dlmgetras {-s host-name -u user-name -p password [folder-to-which-
collected-information-is-output] [-eventlogtime yyyy/mm/dd | -
eventlogsize {all | maximum-file-length}] | -h}
Parameters
host-name
Specify the host name for which to collect error information.
user-name
Specify the user name used to log in to the host.
password
Specify the password used to log in to the host.
folder-to-which-collected-information-is-output
Specify the output folder for the information that is to be collected by the
DLMgetras utility. The output-destination folders shown in
of Error Information Collected by the DLMgetras Utility for Collecting
Error Information on page 7-3
and the information is then stored in the output-destination folders.
-eventlogtime yyyy/mm/dd
The utility obtains logs from each application, system, and security event
log. The logs obtained are those output after 00:00 on the date yyyy/
mm/dd. Specify the date in the yyyy/mm/dd format.
-eventlogsize {all | maximum-file-length}
all
7-2
Utility Reference
Hitachi Dynamic Link Manager User Guide (for VMware(R))
are created in a folder of your choosing,
Table 7-1 List