Hitachi XP P9500 User Manual page 150

Message ID
KAPL01095-E
KAPL01096-E
KAPL01100-I
KAPL01101-W The target HBA port was not
8-16
Message Text
An attempt to acquire the HDLM
version information has failed.
details = aa...aa
An attempt to acquire the
Service Pack version information
has failed. details = aa...aa
aa...aa
found. Operation name =
aa...aa
Hitachi Dynamic Link Manager User Guide (for VMware(R))
¢
Details
aa...aa: Code showing the reason
for the error
Action
Re-execute the command. If the
same error occurs again, execute
the DLMgetras utility for collecting
HDLM error information, acquire
the error information, and then
contact your HDLM vendor or the
company for which you have a
service contract.
Details
aa...aa: Code showing the reason
for the error
Action
Re-execute the command. If the
same error occurs again, execute
the DLMgetras utility for collecting
HDLM error information, acquire
the error information, and then
contact your HDLM vendor or the
company for which you have a
service contract.
Details
This message indicates the
executed command line.
aa...aa: Executed command
Action
None.
Details
The HBA having the HBA port
WWN specified in the -
hbaportwwn parameter could not
be found.
aa...aa: offline or online
Action
Use the view operation of the
HDLM command (dlnkmgr view -
path -hbaportwwn) to check the
target HBA port WWN. After that,
specify the appropriate HBA port
WWN, and then retry.
Messages
Explanation
Execute the HDLM
command's set -lic
operation while the license for
a re-installation is being
updated.