Hitachi XP P9500 User Manual page 113

PathID VmRuntimeName
000000 vmhba2:C0:T0:L0 Online active
210000e08b90c61c-fc.50060e8010027a85:50060e8010027a85-
t10.HITACHI_770101520191
000001 vmhba5:C0:T0:L0 Online active
20000024ff293611:21000024ff293611-fc.
50060e8010027a81:50060e8010027a81-t10.HITACHI_770101520191
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
>
To display path information, by abbreviating the list items
-path -c
When you specify the -path parameter together with the -c parameter,
the command selects certain items to be displayed, and shortens the
contents of each item so that the information about each path fits into a
single line on the screen.
The items that are displayed are PathID, DskName, iLU, CP, Status, and
Type.
For details on what is displayed for each item, see
Information on page
When you use the -c parameter, the number of characters that can be
displayed in the product ID element of the DskName field is limited to 10.
When there are 11 or more characters in the product ID, the 8th and
following characters are abbreviated to ellipses (...).
The sub-parameters (following -path -c) are:
-stname
Use this parameter to display the model ID of the storage system in
the product ID element of the DskName field. When this parameter is
omitted, the command displays the product ID or emulation type of
the storage system instead.
For details about the information about product IDs, see
Product ID displayed by the view -path operation on page
-srt {lu|cp}
Use this parameter to sort the path information in ascending order,
according to the specified sorting key.
The sorting keys are as follows: the first sorting key is the name of
the storage system (DskName), the second sorting key is the value
specified by the -srt parameter, and the third sorting key is
AutoPATH_ID.
The available parameter values to specify the second sorting key are:
• lu: LU number of the storage system
• cp: Port number of the CHA
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Status VmState VmPathUID
6-34.
Command Reference
fc.200000e08b90c61c:
fc.
Table 6-9 Path
Table 6-11
6-39.
6-33