Hitachi XP P9500 User Manual page 118

Displayed Item
No
summary
displayed
VmRuntimeN
#
ame
VmState
VmPathUID
Legend:
- : Not displayed
#
The path information is displayed only when a value is specified for the -
path -item parameter.
Host port number (example: 0000)
Bus number (example: 0000)
Target ID (example: 000000000000003A)
Host LU number(example: 0005)
6-38
Summary
displayed
hbaportwwn parameter or when you specify hbaportwwn for
the -item parameter.
Displays the runtime information for paths managed by
-
VMware vSphere in path information fields. If you specify
the -vmruntimename parameter together with the -path
parameter, this information is displayed instead of the
PathName item.
The path status managed by VMware vSphere. This item is
# -
displayed only when you specify the -vmstate parameter or
when you specify vmstate for the -item parameter.
•
•
•
•
•
•
Paths that are dead, unavailable, or perm_loss require
corrective action. The appropriate action can be determined
by referring to
The UID of the path managed by VMware vSphere. This
#
-
item is displayed when specified in a value of the -path -
item parameter.
Table 6-10 Elements of a path name
Element
Command Reference
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Description
active: Online
standby: Online
off: Offline status caused by a command operation
(Offline(C))
dead: Offline due to an error (Offline(E))
unavailable: Offline due to an error (Offline(E))
perm_loss: Offline due to an error (Offline(E))
What To Do for a Path Error on page
VMware vSphere representation
Host ID (host port number)
Channel number (bus number)
Target ID
Lun (host LU number)
5-2.