Logging In To The Cmc Using The Web-Based Interface - Dell POWEREDGE M1000E Configuration Manual

3 Configure the CMC network settings:
– To set a static IP address, type
setniccfg -s<IP address><network mask><gateway>
and press <Enter>.
Use the appropriate settings for your network.
To configure the CMC to obtain an IP address using DHCP , type
–
setniccfg -d
and press <Enter>.
The new network settings are activated in a few seconds after configuring
the network.

Logging in to the CMC Using the Web-Based Interface

1 Open a supported Web browser window.
For more information, see "Supported Web Browsers" in the CMC User's
Guide.
2 Log in to the CMC.
– If the CMC is accessed using a specific IP address, type the following
URL in the Address field, and then press <Enter>:
https://<CMC IP address>
The default IP address for the CMC is 192.168.0.120. If the default
HTTPS port number (port 443) has been changed, type:
https://<CMC IP address>:<port number>
where <IP address> is the IP address for the CMC and port
number is the HTTPS port number.
– If you access the CMC using a registered DNS name, type the CMC's
name:
https://<CMC name>
By default, the CMC name on the DNS server is cmc-<service
tag>.
The CMC Login page is displayed.
Initial System Configuration
31