Side Shelf (Optional) - DCS BFG-30BS Use And Care & Installation Manual

4.
INSTALLATION
SIDE SHELF (Optional accessory)
Place shelf in the up position and check that it is level.
If shelf is not level, adjust side shelf set screw. Set screws can be adjusted using a 3/32 Allen wrench (Fig. 50).
Turn the Allen wrench clockwise to raise the shelf. Turn 1/4 turn and review to see if the shelf is level. The set
screws in the left and right bracket should be adjusted equally to ensure the shelf sits level (Fig. 51).
Fig. 50 Fig. 51
CHECK LIST
Fj Specified clearances Fj Air shutters adjusted.
maintained to
Fj Adjustable low setting
combustibles.
satisfactory.
Fj Verified proper enclosure
Fj Drip pan in place properly
ventilation.
and sliding freely.
Fj All internal packaging Fj Pressure regulator
removed.
connected and set for
Fj Knobs turn freely, bezels 4.0" W.C. Natural, 11.0"
centered. W.C. LP gas.
Fj Each burner lights Fj Manual shut-off valve
satisfactorily, individually installed and accessible.
or with adjacent burner
Fj Unit tested and free of
lit.
gas and water leaks.
Fj User informed of gas
supply shut-off valve
location.
Fj All radiants are assembled
and put in place.
PLEASE LEAVE THESE
INSTRUCTIONS WITH THE
USER.
USER, PLEASE RETAIN
THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
26