Table of Contents
Advertisement
Applicabletelephoneline:
Compatibility:
Configuration:
Memory size*:
Compression scheme:
Scanning method:
Resolution:
Recording system:
Display:
Reception modes:
Modem speed:
Transmission time*:
Effective recording width:
Input document size:
Effective scanning width:
Public switched telephone network
ITU-T (CCl~) G3 mode
Half-duplex, desktop transceiver
512 KB (approx. 31 average pages with ECM function off)
MH, MR. MfvfR
Flat-bed, solid-state CCD
Horizontal:
8 lines/mm
Vertical:
Standard: 3.85 lines/mm
Fine /Halftone: 7.7 lines/mm
Super fine: 15,4 lines/mm
Thermal transfer recording
7 x 5 dots, 1 line by 16-digit display
FA~EL
9600 bps with automatic fallback to 7200, 4800, or 2400 bps
Approx. 9 seconds (memory transmission)
203 mm (average)
Auto feeding:
Width: 148 to 216 mm
Length: 128 to 356 mm
Manual feeding: Width: 148 to 216 mm
Length: 128 to 1000 mm
210 mm max.
Automatic document feeder: 20 sheets max.
Halftone (gray scale):
64 levels
Contrast control:
Automatic/Dark selectable
Copy function:
Single/Multi-copy/Sort-copy (99 copies/page)
Telephone function:
Standard (cannot be used if power fails)
Power requirements:
230 to 240 V AC, 50
Hz
Operating environment:
5
to
35°C, 20
tO
800/0RH
Power consumption:
Stand-by: 6 W
Maximum: 110 W
Dimensions:
Width: 363 mm
Depth: 488 mm
Height: 188 mm (Without attachments)
Weight:
Approx. 5.9 kg
" Based on ITU-T Test Chart #1 at standard resolution in Sharp special mode, excluding time
for protocol signals (i.e., ITU-T phase C time only).
As a pari of our policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
Spec-1
SPECIFICATIONS
Advertisement
Table of Contents
