Distinctive Ring - Sharp FO-1450 Operation Manual

If you subscribe to a distinctive ring sewice from your telephone company, you will
need to turn on the distinctive ring function. When this is done, your fax machine will
signal voice calls by the normal ring pattern, and fax transmissions by a special ring
pattern. In the case of a fax transmission, your fax machine will automatically
answer the call and receive the fax.
Distinctive ring is normally used with the reception mode set to FAX. In this ~se,
your fax will answer and begin receiving a fax transmission after the number of rings
set with Option Setting 2 (the factory setting is 2 rings). You can also use distinctive
ring in TEL reception mode if you set Option Setting 3 to "YES". In this case, fax
reception will begin after 4 rings.
Important:
The distinctive ring function can only be used if you subscribe to a distinctive ring
service from your telephone company. Do not turn on distinctive ring if you are on
a normal line, as the fax machine will not operate propetiy.
. If you turn on distinctive ring, Faxflel Auto Changeover (Option Setting 8) will
turn off automatically.
1 Press the keys shown at left. "OPTION
'"~o' @
SE~lNG" will appear in the display.
2
Press the keys shown at left.
@@@@@@
"DISTINCTIVE RING" will appear in the
display.
3
Press "1" (YES) to turn on distinctive
@ or @
ring, or "2" (NO) to turn it off.
4
STOP
Press the STOP key,
o
,------
@k?
INITIAL SE~lNGS
2-9