Table of Contents
Advertisement
OPTIONAL SE~lNGS
Setting 3: 4 RINGS TEL ANSWER
Press"1" (YES) to have the machine answer a call after 4 rings when it is in TEL
reception mode. Press "2" (NO) to turn the function off.
Factory setting: "2"
Setting 4: TEUFAX REMOTE NUMBER (TRANSFER CODE)
This sets the 1-digit number for activating fax reception from an extension phone.
Enter any number from "O"to "9".
Factory setting: "5"
Setting 5: REMOTE RECEPTION SELECT
This turns detection of the code for activating fax reception from an extension
phone on or off. Press"1" to turn detection on, or "2" to turn detection off.
Factory setting:
"1"
Setting 6: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out a Transaction Report. Enter a number from
"l"
to "4" as follows:
"l"
(ALWAYS PRINT):
A report will be printed after each transmission,
reception, or error.
"2" (ERR/TIMER/MEM):
A report will be printed after an error, timer
operation, or memory operation.
"3" (SEND ONLY):
A report will be printed only after a transmission.
"4" (NEVER PRINT):
A report will never be printed.
"5" (ERROR ONLY):
A report will be printed only after an error occurs.
. Factory setting: "5"
Setting 7: DIAL MODE
This sets the mode of dialling. Press
"1"
if you are on a tone dial line, or "2" if you
are on a pulse dial line,
For all units installed in New Zealand, select"1" for tone dialiing. The pulse dial
setting ("2") will not operate correctly and must not be used.
Factory setting: "1"
6-2
OPTIONAL SE~lNGS
Advertisement
Table of Contents
