Table of Contents
Advertisement
RECEIVING DOCUMENTS
Receiving documents on an extension phone
If you hear a fax tone when you answer an extension phone, or if the other party
first talks to you and then wants to send a document, press "5", "*" and "+" on a
tone dial phone. If you are on a pulse dial phone, set the handset down (do not
hang up), walk over to the fax, pickup the handset, and press the START key.
Note: Your fax will rrotaccept the signal to begin reception ('5'(, "*", and "*'? ifa
document is loaded in its feeder.
Comments:
The code used to activate fax reception from a tone dial extension phone ("5",
"*
and"*")
can be changed if desired. See Option Setting 4 ("Tel/Fax Remote
Number") in Chapter6, "Optional Settings".
If you do not intend to use the code for activating fa reception, you can turn
detection of the code off by resetting Option Setting 5. This will ensure that the
fax never mistakenly attempts to begin reception if it detects a signal which it
perceives to be similar to "5", "+", and "*" while you are talking on an extension
phone.
3-12
BASIC OPERATIONS
Advertisement
Table of Contents
