Table of Contents
Advertisement
SENDING DOCUMENTS
If desired, there are several transmission settings which you can make before
dialling and transmitting the document.
Note: To make the settings, the document must first be Ioadedin the feeder.
Resolution
Your fax has four resolution settings. If you do not make a setting, the fax will
automatically send the document in STANDARD resolution.
STANDARD:
Use STANDARD for ordinary documents. This setting
gives you the fastest and most economical transmission.
FINE:
Use FINE for improved reproduction, especially with
documents containing small letters or fine drawings.
SUPER FINE:
Use SUPER FINE when you need the highest quality of
reproduction,
HALF TONE:
Use HALF TONE for photographs and illustrations. The
original will be reproduced in 64 shades of grey.
Note: In order to transmit in FINE or SUPER FINE resolution, the receiving fax
machine must also have that resolution. If it doesn't, your fax will
automatically step down to the next best available setting.
Contrast
The contrast is normally set to AUTO, which means that the fax automatically
controls the contrast, but for faint documents you can change the setting to DARK.
Setting the resolution and contrast
F
PaY
Press the RESOLfJTlON key one or
more times until the desired resolution
and contrast settings appear in the dis-
—
h
The first time you move through the
list of resolution settings, the contrast
setting AUTO will appear next to each
resolution setting. The second time
you move through the list, the contrast
setting DARK will appear.
BASIC OPERATIONS
3-3
Advertisement
Table of Contents
