Table of Contents
Advertisement
ENTERINGLETTERSFORNAMES
")
Names are programmed by pressing the numeric keys. You will notice that letters
are indicated above each of the number keys "2" through "9". To enter a letter (or
number), press the appropriate key one or more times until the letter appears in the
display (the number will appear first, followed by the letters in the order indicated
above the key). The keys used for entering letters and editing are shown below.
Letters and numbers
To enter a letter or number, press
Space
the appropriate key repeatedly until
Press this key twice to
the desired number/letter appears
enter a space,
in the display (the number appears
flrSt, then the letters in the order
I
shown above the key),
I
/
Delete
0 *
Symbols
I
Press either key repeatedly until the
desired symbol appears (see the
symbol list on the following page).
Press this key to delete the
SPEED DIAL
letter highlighted by the cursor
0/
(if the cursor is to the right of
the last letter entered, it will
REDIAL
backspace and delete the last
o,
::tt:
HO LO/
SEARCH
Press this key once to change
\
case (press ii again to chan~e
back).
SPEAKER
Cursor left
o
Press this key to move the
cursor to the left.
\
Cursor right
Press this key to move the
cursor to the right.
Comments:
To enter two letters in succession which require using the same key, press the
SPEAKER key once after entering the first letter, then enter the second letter.
To change one individual letter to another, move the cursor to that letter and
enter the desired letter. The new letter will simply replace the old one.
INITIAL SETTINGS
2-5
Advertisement
Table of Contents
