Table of Contents
Advertisement
... . .*-.
*
'-v-–"
ENTERINGAND'USINGPROGRAtiS"'x"':-'fv*?"%~
If you frequently perform the same operation involving the same party, you can
program all the steps of the operation into one Program Key. This allows you to
perform the operation by simply pressing that key.
Rapid Keys 16/Pl and 17/P2 can be used as Program Keys. However, a key
cannot be used if it is already being used for Rapid Key Dialling.
Only Speed Dial numbers can be used to enter fax numbers of receiving
machines in the Program Keys. Full numbers cannot be entered.
If the program is for a regular transmission or polling operation, a timer setting
can be included to have the operation performed automatically at a selected time.
To clear a mistake, press the
STOP
key.
To program an operation, first perform the following basic procedure. After you
have completed it, refer to the procedure for the specific operation you want to
program.
1
Press the keys shown at left. "PRG. EN-
'"~"'
m
@
TRY MODE" will appear in the display.
2
Press "1" to select SET.
3—
161P1
~
Press a Program Key ('i16/Pl "or
'L17/P2")to select it.
m
0'
F'/
4
Enter a name for the program (max. of
&
a
a
"."
@
20 characters). (See "Entering Letters
for Names" in Chapter 2).
Skip this step if you don't want to enter a
name.
SPECIAL FUNCTIONS
5-11
Advertisement
Table of Contents
