Download Print this page
Sharp FO-1470 Operation Manual
Hide thumbs Also See for FO-1470:

Advertisement

Quick Links

1. Installation
2. Setting up and Using OpenLCR
3. Sending Documents
4. Receiving Documents
5. Making Copies
6. Making Telephone Calls
7. Answering Machine Hookup
8. Special Functions
9. Printing Lists
10. Maintenance
11. Troubleshooting
MODEL
FO-1470
FACSIMILE
OPERATION MANUAL
open
LCR
www.OpenLCR.com

Advertisement

loading

Summary of Contents for Sharp FO-1470

  • Page 1 MODEL FO-1470 open FACSIMILE www.OpenLCR.com OPERATION MANUAL 1. Installation 2. Setting up and Using OpenLCR 3. Sending Documents 4. Receiving Documents 5. Making Copies 6. Making Telephone Calls 7. Answering Machine Hookup 8. Special Functions 9. Printing Lists 10. Maintenance...
  • Page 2 In order to program this information into your facsimile machine, please refer to the appropriate instructions in the operation manual."  As an ENERGY STAR partner, SHARP has deter-  mined that this product meets the ENERGY STAR guidelines for energy efficiency.
  • Page 3 196 lines/inch (7.7 lines/mm) Super fine: 391 lines/inch (15.4 lines/mm) 20 pages max. Automatic document feeder *Based on ITU-T Test Chart #1 at standard resolution in Sharp special mode, excluding time for protocol signals (i.e., ITU-T phase C time only).
  • Page 4 all-ux510A.book Page 2 Thursday, September 14, 2000 9:05 AM Thermal transfer recording Recording system 64 levels Halftone (grayscale) 7 x 5 dots, 1 line by 16-digit display Display Letter: 200 sheets Paper tray capacity Legal: 200 sheets (16- to 20-lb. paper) Compression scheme MR, MH, MMR Applicable telephone line Public switched telephone network...
  • Page 5 Approx. 10.6 lbs. (4.8 kg) Weight As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.
  • Page 6 all-ux510A.book Page 4 Thursday, September 14, 2000 9:05 AM • Never insert objects of any kind into slots or openings on the machine. This could create a risk of fire or electric shock. If an object falls into the machine that you cannot remove, unplug the machine and consult a qualified service representative.
  • Page 7 all-ux510A.book Page 5 Thursday, September 14, 2000 9:05 AM Table of Contents Introduction Important safety information ....... . 3 Table of Contents 1.
  • Page 8 all-ux510A.book Page 6 Thursday, September 14, 2000 9:05 AM Table of Contents 7. Answering Machine Hookup Connecting an Answering Machine ......81 Optional A.M.
  • Page 9 all-ux510A.book Page 7 Thursday, September 14, 2000 9:05 AM 1. Installation Unpacking Checklist Before setting up, If any are missing, make sure you contact your dealer have all of the or retailer. following items. Paper tray Rapid key cover labels Operation manual Paper tray...
  • Page 10 all-ux510A.book Page 8 Thursday, September 14, 2000 9:05 AM A Look at the Operation Panel A Look at the Operation Panel TEL FAX SPEED DIAL SHIFT A.M. REDIAL VOLUME DOWN HOLD/ PQRS WXYZ RECEPTION SEARCH FUNCTION RESOLUTION MEMORY MODE 14/POLL 15/P1 COPY/ START...
  • Page 11 all-ux510A.book Page 9 Thursday, September 14, 2000 9:05 AM A Look at the Operation Panel Rapid Dial Keys Press one of these keys to dial a fax number automatically. OpenLCR key Press this key to register for OpenLCR service and receive carrier rate data to your fax.
  • Page 12 all-ux510A.book Page 10 Thursday, September 14, 2000 9:05 AM Connections Connections   Points to keep in mind when setting up Do not place the machine in Do not place the machine near direct sunlight. heaters or air conditioners. Keep dust away from the Keep the area around the machine.
  • Page 13 all-ux510A.book Page 11 Thursday, September 14, 2000 9:05 AM Connections Connecting the Handset Connect the handset as shown and place it on the handset rest. ♦ The ends of the handset cord are identical, so they will go into either jack. Make sure the handset cord goes into the unmarked...
  • Page 14 all-ux510A.book Page 12 Thursday, September 14, 2000 9:05 AM Connections Connecting the power cord Plug the power cord into a 120 V, 60 Hz, grounded AC (3-prong) outlet. Caution! Do not plug the power cord into any other kind of outlet. This will damage the machine and is not covered under the warranty.
  • Page 15 all-ux510A.book Page 13 Thursday, September 14, 2000 9:05 AM Connections Connecting the telephone line cord Insert one end of the line cord into the jack on the back of the machine marked TEL. LINE. Insert the other end into a standard (RJ11C) single-line wall telephone jack.
  • Page 16 all-ux510A.book Page 14 Thursday, September 14, 2000 9:05 AM Connections Attachments Insert the paper tray into the back of the fax as shown. Extension phone (optional) If desired, you can connect an extension phone to the TEL. SET jack on the fax. ♦...
  • Page 17 Follow the steps below to load or replace the film. When replacing the film, use a The initial starter roll of roll of Sharp UX-15CR imaging film included with imaging film. One roll can print your fax can print about about 500 letter-size pages.
  • Page 18 all-ux510A.book Page 16 Thursday, September 14, 2000 9:05 AM Loading the Imaging Film If you are replacing the imaging film, take the old film out of the printing compartment and remove the three (3) green gears and the green flange from the ends of the spools.
  • Page 19 all-ux510A.book Page 17 Thursday, September 14, 2000 9:05 AM Loading the Imaging Film 1 tab Cut the band which holds the spools 2 tabs together with scissors, and remove it. Insert the remaining gear into the right end of the empty spool and the flange into the left end of the empty spool.
  • Page 20 FILM END Use the following imaging film, which is available from your dealer or retailer: Sharp UX-15CR Imaging Film Caution! The text of documents printed with the imaging film is visible on the used film. If confidential information has been printed, dispose of the...