~Settingthe Dateandtime - Sharp FO-1450 Operation Manual

~SETTINGTHE DATEANDTIME ~'
..
The date and time appear in the display and reports, and are printed at the top of
every page you transmit, Set the date and time by pressing the keys on the
operation panel as shown below.
+ To correct a mistake, press the SPEED DIAL key to move the cursor back to
the mistake, and then enter the correct number,
1
'"~"' m
Press the keys shown at left. "ENTRY
MODE" will appear in the display.
2
am
Press the keys shown at left. "DATE&
TIME SET" will appear in the display,
3
START
F]
Press the START key.
(Example: the 5th)
Enter a 2-digit number for the day ("01"
to "31"),
5
mm
Enter a 2-digit number for the month
("01" for January, "02" for February "12"
(Example: January) for December, etc.),
6
m m
Enter the last 2 digits of the year,
(Example: 1996)
7 @ @ @ m
Enter a 2-digit number for the hour ("00"
to "23") and a 2-digit number for the min-
(Example: 9:25)
ute "00" to "59").
Press the START key and then the
8
!S:T1 ~S:,l
STOP key,
INITIAL SETTINGS
2-7