Table of Contents
Advertisement
Your fax has a memory which can be used to temporarily store both incoming and
outgoing documents.
+ Approximately 34 pages of average content (based on ITU-T Test Charl #1 at
standard resolution) can be held in memory if they are all going to be transmitted
(24
pages if Option Setting 18 is set to YES), or 31 pages if they are all received
(29 pages if Option Setting 18 is set to YES). Less can be held if any were
scanned using fine or halftone resolution.
With this function, the original document is scanned immediately, stored in memory,
and then transmitted once the connection to the receiving machine is made. This is
convenient when transmitting to places where the line is often busy, as it saves you
from waiting to pickup the original document and frees the feeder for other
operations. After transmission, the document will be cleared from memory.
+ Only one memory transmission can be set at a time.
+ The amount of memory currently occupied appears as a percentage in the
display while the document is being scanned.
1
Load the document(s).
. Set the resolution and/or contrast if de-
sired.
,/-, '.
.~
2
MEMORY
Press the MEMORY key and then "l".
o
m
3
Enter the number of the receiving ma-
m
chine using one of the following methods:
Press a Rapid Key.
. Press the SPEED DIAL key and enter
a Speed Dial number.
Enter a full telephone number by
(Example)
pressing the number keys,
5-2
SPECIAL FUNCTIONS
Advertisement
Table of Contents
