Sharp FO-1450 Operation Manual page 4

Hide thumbs Also See for FO-1450:
Table of Contents

Advertisement

INTRODUCTION
Impofiant safety information
The socket-outlet must be installed near the equipment and must be easily acces-
sible.
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack is specificallydesigned
for wet locations.
Never touch uninsulated telephone wires or teminals unless the telephone line has
been disconnected at the network interface.
in Australia, installing or modifying telephone lines should only be done by an Austel
licensed serviceman. In New Zealand, installing or modifyingtelephone lines should
be done in accordance with Teiecom wiring practices.
Avoid using a telephone (otherthan a cordless type) during an electrical stem. There
may be a remote risk of electric shock from lightning.
Do not use a telephone in the vicini~ of a gas leak.
Do not install or use the machine near water, or when you are wet. Take care not to
spill any liquids on the machine.
+ Your fax machine and the telephone system
The Australian Austel Registration Number and Ringer Equivalence Number (REN)
and the N.Z. Telecom Registration and Ringer Approximate Loading (RAL) for this
equipment are shown on the labels on the back of the machine. The telephone
company may require these numbers.
Australia: The sum of all Ringer Equivalence Numbers on your telephone line
should be three or less in order to assure proper setvice from the telephone
company.
New Zealand: The sum of all Ringer Approximate Loadings on your telephone line
should be five or less in order to assure proper service from the telephone company.
ii
INTRODUCTION

Advertisement

Table of Contents
loading

Table of Contents