Table of Contents
Advertisement
OPTIONAL SE1l'lNGS
Setting 8: TEUFAX AUTO CHANGEOVER
Press
"l"
(YES) to have your fax detect whether incoming calls are voice calls or
fax transmissions in FAX reception mode. Press "2" (NO) to turn the function off.
Factory setting: "2"
Setting 9: PSEUDO RING!NG DURATION
This sets the duration of pseudo ringing when Tel/Fax Auto Changeover is turned
on. Press"1" for 15 seconds or "2" for 30 seconds.
Factory setting: "1"
Setiing 10: A.M. CONNECTED
Press "1" (YES) if an answering machine is connected to the fax, or "2" (NO) if not.
Factory setting: "2"
Setting 11: QUIET DETECT TIME
This sets the duration of silence (in seconds) after which the fax will take over the
line and begin reception when an answering machine is connected. Enter a number
from "01" to "1O",or enter "00" to turn off the function. (See Chapter 4 for more
details.)
Factory setting: "04"
Setting 12: FAX RX A.M. FAILS
Press
"1"
(YES) to have the fax answer a call if an answering machine connected
to the fax does not answer within 5 rings. Press "2" (NO) to turn the function off.
(This setting is described in more detail in "Optional Settings" in Chapter 4.)
. Factory setting: '12"
Setting 13: DISTINCTIVE RING
If you subscribe to a distinctive ring sefvice from your telephone company, press
"l" to have your fax signal voice calls and fax transmissions by different ring
patterns. Press "2" to turn the function off. (This setting is described in more detail
in "Distinctive Ringing" in Chapter 2.)
Factory setting: "2"
OPTIONAL SEITINGS
6-3
Advertisement
Table of Contents
