Setting The Video Signal (Video Menu Only); Selecting A Background Image - Sharp XV-Z91E Operation Manual

Setting the Video Signal (VIDEO menu only)

2,3,4
5
On-screen Display

Selecting a Background Image

2,3,4
On-screen Display
-37
The video input system mode is preset to "Auto";
however, it can be changed to a specific system mode
if the selected system mode is not compatible with the
connected audiovisual equipment.
1 Press MENU. The "Picture" menu screen appears.
2 Press
1, 6
3 Press
4 Press
5 Press ENTER to save the setting.
6 To exit the menu screen, press MENU.
• When the system mode is set to "Auto", you may not receive
a clear picture due to signal differences. Should this occur,
switch to the video system of the source signal.
• "Auto" cannot be set for PAL-M and PAL-N input signals.
Select "PAL-M" or "PAL-N" in "Video System" menu for
PAL-M and PAL-N input signals.
This function allows you to select the image displayed
when no signal is being sent to the projector.
Description of Background Images
Selected item
Blue (
None (
1, 5
1 Press MENU. The "Picture" menu screen appears.
2 Press
3 Press
4 Press
5 To exit the menu screen, press MENU.
/ to display the "Options" menu screen.
/ to select "Video System", and then
press .
/ to select the desired video system
mode.
Description
)
Blue screen
) Black screen
/ to display the "Options" menu screen.
/ to select "Background".
/ to select the background image you
want to display on the screen.