Turning On/Off The On-Screen Display; Setting The Video Signal (Video Menu Only) - Sharp XG-P25X Operation Manual

Turning On/Off the On-screen Display

This function allows you to turn on or off the on-screen messages that appear during input select.
See page for the procedure details.
38

Setting the Video Signal (VIDEO menu only)

The video input system mode is preset to "Auto"; however, it can be changed to a specific system mode
if the selected system mode is not compatible with the connected audiovisual equipment. See page
for the procedure details.
38
• When the system mode is set to "Auto", you may not receive a clear picture due to signal differences. Should this occur,
switch to the video system of the source signal.
• AUTO cannot be set for PAL-M and PAL-N input signals. Select "PAL-M" or "PAL-N" in "Video System" menu for PAL-M and
PAL-N input signals.
Selected item Description
Normal All On-screen Display are displayed.
Level A
Input/Custom/Freeze/Enlarge/Auto sync/Volume/Mute/
Black screen functions are not displayed.
Level B All On-screen Display are not displayed (except Menu/
Lens functions and warning display (Power off/Temp./
Lamp function etc.)).
E-48