Table of Contents
Advertisement
Displaying the Break Timer
This function can be used to show the remaining time for break during meeting.
Displaying and Setting
the Break Timer
1
Press
. The break timer
starts to count down from 5
minutes.
2
When "
" is displayed, press
' '
'
' ' , "
" "
" " , \ \ \ \ \ or | | | | | to set the break
timer.
• You can set anywhere between 1 and
60 minutes (in 1 minute units).
• The break timer starts to count down
as soon as ' , " , \ or | is pressed.
3
Press
to cancel the break
timer.
Note
• Auto Power Off will be temporarily dis-
abled during the break timer.
When no input signal is detected for more
than 15 minutes, the projector will auto-
matically shut off if the break timer has
elapsed.
• The break timer will be displayed on the
startup image. To change the screen dis-
played during the break timer, change the
setting of "Startup Image" (see page 68).
"On-screen Display
'
"
\
|
,
,
,
buttons
BREAK TIMER
button
-59
Advertisement
Table of Contents
