Displaying and Setting the Break Timer
Remote control
∂/ƒ/ß/©
BREAK TIMER
On-screen Display
Computer Image Adjustments using AUTO SYNC
Projector
AUTO
SYNC
On-screen Display
g
s
This function can be used to show the remaining time
for break during meeting.
1
Press BREAK TIMER. The timer starts to count
down from 5 minutes.
• You can set the Break Timer 1 to 60 minutes with ∂/ƒ/
2
Press BREAK TIMER to cancel the Break Timer.
• The Break Timer is displayed against the background image
selected in "Selecting a Startup Image." (See page
Remote control
This function can be used to automatically adjust a
computer image.
Press AUTO SYNC. During Auto Sync adjustment, the
On-screen Display changes as shown on the bottom
left.
• See page
Sync.
• Auto Sync adjustment may take some time to complete,
depending on the image of the computer connected to the
projector.
f
ß/©. The timer starts to count down as soon as ∂/ƒ/
ß/© is pressed.
45
"Auto Sync Adjustment" for setting the Auto
49
)
E-34