Faxing A Two-Sided Original - Sharp AR-FX12 Operation Manual

FAXING A TWO-SIDED ORIGINAL

A two-sided document can be automatically transmitted using the automatic document feeder. Follow the steps
below to automatically send a two-sided document.
1 Make sure the machine is in fax mode.
MODE SWITCH
FAX
E-MAIL/FTP
INTERNET FAX
SPEAKER
FAX
MODE SWITCH
2 Place the original in the automatic
document feeder
AUTOMATIC DOCUMENT FEEDER" on
page 1-7) .
3 Touch the [ORIGINAL] key.
STANDARD
RESOLUTION
AUTO A4
ORIGINAL
When you touch the [ORIGINAL] key, check the
original size that appears in the key. If the size was
not detected correctly, specify the correct size.
(See "MANUALLY SETTING THE SCANNING
SIZE" on page 1-8.)
NOTES
Booklets and tablets
Two-sided originals that are bound at the side are booklets, and two-sided
originals that are bound at the top are tablets.
Two-sided scanning turns off after the document is stored in memory.
Pressing the [CA] key will also cancel two-sided scanning.
When the [IMAGE
SEND] key light is on,
the machine is in fax
mode. If the light is not
on, press the [IMAGE
SEND] key.
If the network scanner
option is installed, touch
the [MODE SWITCH]
key and then the [FAX]
key to switch to fax
mode.
When fax mode is
selected, "FAX" appears
in the top half of the
[MODE SWITCH] key.
(see "USING THE
If the address book
screen appears, touch
the [CONDITION
SETTINGS] key to
display the condition
settings screen (see
page 1-5).
4 Touch the [2-SIDED BOOKLET] key or the
[2-SIDED TABLET] key as appropriate for
the original you loaded.
STORE SEND
100%
AUTO A4
2-SIDED 2-SIDE
BOOKLET TABLET
5 Touch the [OK] key.
KER RESEND
OK
SEND
AUTO
ED
STANDARD
RESOLUTION
AUTO A4
ORIGINAL
6 Continue from
PROCEDURE FOR SENDING FAXES"
(pages 2-2 to 2-3).
Booklet
SENDING A FAX
You will return to the
initial screen.
A two-sided original icon
appears next to the
[ORIGINAL] key.
Example:
The icon that appears
when the [2-SIDED
BOOKLET] key is
touched.
step 4 of "BASIC
Tablet
2-7
2