Selecting Resolution And Exposure Settings; Selecting The Resolution - Sharp AR-FX12 Operation Manual

SELECTING RESOLUTION AND EXPOSURE SETTINGS

After loading an original, you can adjust the resolution and exposure settings to match the condition of the original-for
example, if it has small or faint characters, or if it is a photo. After loading the original in fax mode, adjust the settings
as explained below.

SELECTING THE RESOLUTION

The initial resolution setting is STANDARD. To change the setting, follow these steps:
Change the resolution.
1 Touch the [RESOLUTION] key.
STANDARD
RESOLUTION
AUTO A4
ORIGINAL
2 Touch the [STANDARD] key, [FINE] key,
[SUPER FINE] key, or [ULTRA FINE] key.
STANDARD
FINE
SUPER FINE HALF TONE
ULTRA FINE
3 Touch the [OK] key.
OK
DARD
NE
HALF TONE
FINE
FINE
NOTES
The factory default setting for the initial resolution is
[STANDARD]. The initial resolution can be changed
to a different setting in the key operator programs
(see "Initial resolution setting" on page 8-4).
When using the automatic document feeder, the
resolution setting cannot be changed once
scanning has begun.
When a fax is sent at [ULTRA FINE], [SUPER
FINE], or [FINE] resolution, a lower resolution will
be used if the receiving machine does not have
that resolution.
1-10
The selected key is
highlighted.
If you touched the [FINE]
key, [SUPER FINE] key,
or [ULTRA FINE] key,
you can also select
halftone by touching the
[HALF TONE] key.
You will return to the
initial screen.
Resolution settings
Touch this key if your original consists
Standard of normal-sized characters (like those
in this manual).
Touch this key if your original has small
characters or diagrams. The original
Fine
will be scanned at twice the resolution
of the [STANDARD] setting.
Touch this key if your original has
intricate pictures or diagrams. A
Super fine
higher-quality image will be produced
than with the [FINE] setting.
Touch this key if your original has
intricate pictures or diagrams. This
Ultra fine setting gives the best image quality.
However, transmission will take longer
than with the other settings.
Touch this key if your original is a
photograph or has gradations of colour
(such as a colour original). This setting
will produce a clearer image than
Half tone
[FINE], [SUPER FINE], or [ULTRA
FINE] used alone. Half tone cannot be
selected if [STANDARD] has been
selected.