Priority Transmission Of A Stored Job; Cancelling A Fax Transmission; Cancelling On-Hook Dialing - Sharp AR-FX12 Operation Manual

PRIORITY TRANSMISSION OF A STORED JOB

If you have an urgent transmission job and multiple transmission jobs have already been stored, you can give priority
to the urgent job so that it will be transmitted immediately after the job currently being executed. This is done from the
job status screen. For details on using the job status screen, refer to page 1-15 of "Operation manual (for general
information and copier operation)".
Press the [JOB STATUS] key.
1
2 Touch the [FAX JOB] key.
WAITING
DETAIL
WAITING
PRIORITY
WAITING
STOP/DELETE
FAX JOB

CANCELLING A FAX TRANSMISSION

You can cancel a transmission job that is in progress or has been stored. Cancellation is done from the fax job status
screen. (Printing of a received fax cannot be cancelled.)
1 Press the [JOB STATUS] key.
2 Touch the [FAX JOB] key.
WAITING
DETAIL
WAITING
PRIORITY
WAITING
STOP/DELETE
FAX JOB

CANCELLING ON-HOOK DIALING

To cancel on-hooking dialing (dialing by touching the [SPEAKER] key and then the numeric keys) when you need
to redial the number or because transmission was interrupted, touch the [SPEAKER] key once again.
Touch the key of the job to which you wish
3
to give priority.
The touched key is highlighted.
4 Touch the [PRIORITY] key.
AITING
DETAIL
AITING
PRIORITY
AITING
STOP/DELETE
FAX JOB
NOTE
If the job in progress is a broadcast transmission job
(see page 3-2) or a serial polling job (see page 3-13),
the priority job will temporarily interrupt the job after the
transmission currently in progress is finished. When the
priority job is finished, the broadcast transmission or
serial polling job will resume. However, if the priority job
is also a broadcast transmission or serial polling
operation, the job is begun after all transmissions of the
current broadcast or serial polling job are completed.
3 Touch the key of the job that you wish to
cancel.
The touched key is highlighted.
4 Touch the [STOP/DELETE] key.
AITING
DETAIL
AITING
PRIORITY
AITING
STOP/DELETE
FAX JOB
NOTES
If you do not wish to cancel the transmission,
touch the [NO] key.
"CANCEL" will appear in the Transaction Report
of a job that is cancelled.
The selected job moves
up to the next position
after the job currently
being executed.
When the current job is
completed, execution
begins of the job
selected in step 3.
A message appears to
confirm the cancellation.
Touch the [YES] key to
delete the selected job
key and cancel the
transmission.
2-9
2