Storing, Deleting, And Using Original Sizes; Storing Or Deleting An Original Size; Using A Stored Original Size - Sharp AR-FX12 Operation Manual

Facsimile expansion kit
Hide thumbs Also See for AR-FX12:
Table of Contents

Advertisement

STORING, DELETING, AND USING ORIGINAL SIZES

Up to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power is
turned off. Storing a frequently used original size saves you the trouble of manually setting the size each time you
fax that size of document.
To cancel an original size storing, using, or deleting operation, press the [CA] key or touch the [ORIGINAL] key
on the screen.

STORING OR DELETING AN ORIGINAL SIZE

1
Touch the [ORIGINAL] key.
STANDARD
RESOLUTION
AUTO
A4
ORIGINAL
Touch the key under [SCAN SIZE].
2
SCAN SIZE
100%
AUTO
A4
2-SIDED
2-S
BOOKLET
TAB
Touch the [CUSTOM SIZE] key.
3
A5R
MANUAL
B5
B5R
CUSTOM
SIZE
STANDARD SI
Touch the [STORE/DELETE] key.
4
RECALL
STORE/DELETE
Touch the original size key (
5
you wish to store or delete.
X68 Y78
RECALL
STORE/DELETE
stored size, touch the key that shows the size that you
wish to delete or change.
If you are storing an original size, go to step 6.
If you are deleting an original size, go to step 8.
If you are changing an original size, go to step 8
and touch the [AMEND] key.
) that
To store an original size,
touch a key that does not
show a size (
).
Keys that already have an
original size stored will show
the stored size (
).
X68 Y78
To delete or change a
6
Enter the X (width) and Y (length) dimensions
of the original with the
X
CANCEL
OK
A
Y
(64 432)
X
420
mm
(64 297)
Y
297
mm
RECALL
STORE/DELETE
length of 64 to 297 mm (2-1/2 to 11-5/8 inch) can
be entered in Y.
7
Touch the [OK] key.
The original size entered in step 6 is stored in the
key selected in step 5.
To exit, touch the [ORIGINAL] key.
When you touch a key that shows an
8
original size in step 5, a message screen
appears that contains the keys [CANCEL],
[DELETE], and [AMEND].
To cancel the procedure, touch the [CANCEL] key.
To delete the selected original size, touch the
[DELETE] key.
To change the original size stored in the key, touch
the [AMEND] key. The screen of step 6 will appear
to let you change the size.
To exit, touch the [ORIGINAL] key.
9

USING A STORED ORIGINAL SIZE

1
Follow steps 1 to 3 of "STORING OR
DELETING AN ORIGINAL SIZE".
Touch the original size key that you wish
2
to use.
X68 Y78
RECALL
STORE/DELETE
3
Touch the [OK] key.
The stored original size is called up.
keys.
X
(width)
is
initially
selected.
Enter X and then touch
the (
) key to enter Y.
A width of 64 to 432 mm
(2-1/2 to 17 inch) can be
entered in X, and a
1-9
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-m350uMx-m450uMx-m350nMx-m450n

Table of Contents