Sharp AR-FX12 Operation Manual page 89

Problem
Printing does not take Does a message appear in the
place after reception. display instructing you to add toner
or paper? (Printing is not possible.)
A received image Was the wrong side of the original
prints out blank. scanned in the transmitting machine?
The received image Is the original faint?
is faint.
The received image Were line conditions poor due to
is distorted. thunder or another reason?
White or black lines Is the document glass dirty?
appear in the
transmitted image.
A dial tone is not heard Is the volume set to "low"?
through the speaker.
A ringing sound is not Has the ringer volume been turned
made. off?
Check
Restore printing capability
as instructed by the display
message. Printing will begin.
Check with the operator of
the transmitting machine.
Ask the other party to re-
send the document using a
suitable exposure setting.
Ask the other party to send
the document again.
Clean the document glass . Operation
Set the speaker volume to
"medium" or "high".
Set the ringer volume to
"low", "medium", or "high".
PROBLEMS AND SOLUTIONS
Solution
"WHEN AN ALARM SOUNDS
AND A WARNING MESSAGE
IS DISPLAYED", page 7-3.
general information and
copier operation), page 6-2.
"Speaker volume settings",
page 8-6.
"Speaker volume settings",
page 8-6.
Page
_
_
_
manual (for
7
7-5