Two-Sided Original Transmission Function - Sharp AL-2060 Operation Manual

TWO-SIDED ORIGINAL TRANSMISSION FUNCTION

The RSPF can be used to automatically fax a two-sided original. If desired, the back of the original can be rotated
180° before transmission.
• The original must be placed in the RSPF when using the two-sided original transmission function. The
Note
document glass cannot be used.
• The two-sided original transmission function cannot be selected when direct transmission mode is selected.
Likewise, direct transmission mode cannot be selected when the two-sided original transmission function is
selected.
Follow these steps to fax a two-sided original:
1
Place the original(s) in the RSPF.
(p.50)
Original face up
2
Press the [2-SIDED TX] key until the
desired setting appears.
Select the setting according to the original type
(booklet or tablet) as indicated below. If the setting is
incorrect, every other page of the received fax will be
inverted.
Booklet
56
The selections are as
follows:
OFF
ON (ROTATE)
ON (NON-ROTATE)
If you are faxing a
two-sided booklet type
original, select "ON
(ROTATE)".
Tablet
To cancel this function, select "OFF".
3
Press the [OK] key.
1,2,3,
1,2,3,
SP. FUNC
If you are faxing a
two-sided tablet type
original, select "ON
(NON-ROTATE)".