Duplex Scanning For Two-Sided Documents - Sharp FO-5800 Operation Manual

Duplex Scanning for Two-sided Documents

To transmit or copy documents which have printing or graphics on
both sides of the page or pages, use Duplex Scanning. With this
function, you simply feed the document (all pages) through the
machine once, turn the stack of pages over, and feed it through again.
♦ The machine will automatically sort the pages into the correct order
(front of 1st page, back of 1st page, front of 2nd page, back of 2nd
page, etc.).
♦ Duplex Scanning can be used for copying (single copies and sorted
multiple copies only) and any type of transmission from memory.
♦ Note that any blank sides must be included when scanning the
pages (if the number of pages is not equal each time the machine
scans the stack, an error will result). The blank sides will not, how-
ever, be printed out.
1
Load the document (s).
• Make sure the page(s) are front face
down, with the first page on the
bottom.
• SEND READY will appear in the
display.
2
Press the DUPLEX SCAN key and
then the START key.
Duplex Scanning for Two-sided Documents
DUPLEX SCAN
START
131