Adjusting The Resolution And Contrast - Sharp UX-84 Operation Manual

all-UX84H.book Page 66 Wednesday, July 5, 2000 8:48 AM
Downloaded from: http://www.usersmanualguide.com/

Adjusting the Resolution and Contrast

Adjusting the Resolution and Contrast
If desired, you can adjust the resolution and contrast before sending a
document.
The default resolution
setting is STANDARD
and the default contrast
setting is AUTO.
Note: The resolution and contrast settings are only effective for sending and
copying a document. They are not effective for receiving a document.
Resolution settings
STANDARD
FINE
SUPER FINE
HALF TONE
Contrast settings
AUTO
DARK
66
You must adjust the
resolution and/or
contrast each time you
don't want to use the
default settings.
Use STANDARD for ordinary documents.
This setting gives you the fastest and most
economical transmission.
Use FINE for documents containing small
letters or fine drawings.
Use SUPER FINE for documents containing
very small letters or very fine drawings.
Use HALF TONE for photographs and
illustrations. The original will be reproduced
in 64 shades of gray.
Use AUTO for normal documents.
Use DARK for faint documents.