Repositioning The Image; Adjusting Image Appearance - Epson PowerLite 8150i Administrator's Manual

note
If you have repositioned the
image or adjusted the sync
setting, you can use the Auto
button on the remote control
to restore the default settings.
Fine-tuning the Projector
70

Repositioning the Image

Follow these steps to move the image to a different position:
1. Press the button. You see the menu screen.
Menu
2. Press to select the Video menu.
Enter
3. Press to select the
Enter
option. You see the following on the
right side of the screen:
4. Use the arrow buttons (control panel)
or the button (remote control) to
Enter
move the image left, right, up, or down.
5. Once the image is positioned where you want, press
the menu system.

Adjusting Image Appearance

Follow these steps to adjust the appearance of your image:
1. Press the button. You see the menu screen.
Menu
2. Press to select the Video menu.
Enter
3. Use the arrow buttons (control panel) or the
(remote control) to set one of the following options:
Brightness
Lightens or darkens the overall image.
Contrast
Adjusts the difference between light and dark areas.
Tracking (computer images only)
Removes unwanted vertical lines from a computer image by
matching the projector's internal clock to the computer
display signal.
Sync (computer images only)
Corrects fuzziness by synchronizing the projector with the
tracking signal sent from the computer.
Color (composite video or S-Video only)
Adjusts the color depth or intensity of the image.
Position
Enter
to exit
Esc
button