Identifying The Projector In The Emp Software - Epson PowerLite 8150i Administrator's Manual

3. Make sure
English
Adobe Acrobat 4.0 to view the ELP Link V User's Guide, click
Install Acrobat Reader
4. Follow the on-screen instructions to finish the installation.
The following programs are installed on the system:
EMP Link V
EMP File Utility
EMP Scenario
EMP Tablet
5. Restart the system.
Follow the instructions in the next section to identify the projector in
the EMP software.

Identifying the Projector in the EMP Software

To enable the EasyMP software to recognize the projector, follow the
steps below to register the projector's name. (If you have multiple
projectors on your network, it may be easier to register their names in
the pjhosts.ini file; see page 54.)
1. Open EMP Tablet: click
.
EMP Tablet
You see this screen:
2. Click .
Search
is the selected language. If you wish to install
. Then click .
OK
,
Start Programs
, , and then
EasyMP
note
After installing the software,
you may wish to place the
projector User's Guide on the
user's system. Insert the
PowerLite 8150i CD-ROM.
When you see the main
menu, click Install/View
Documentation and select
the pieces you wish to install.
Setting up EasyMP.net
53