Selecting The Image Source - Epson PowerLite 8150i Administrator's Manual

Displaying and Adjusting the Image
38
You see a drop-down list:
select the
desired
setting
3. Select the desired settings.
4. When you're done, click
The EasyMP.net main menu screen appears:
Follow the instructions in the next section to switch between picture
sources and display the desired image.

Selecting the Image Source

If the projector is connected to a computer or video source, you can
display the source image by following these steps:
1. Turn on your computer or video device. (If you're projecting a
video, press on the video device.)
Play
2. If you've connected a computer running Windows and it displays
a New Hardware Found message saying that it has found a
plug-and-play monitor, click
.
Set
.
Cancel
click Set