Connecting Composite (Rca) Video - Epson PowerLite 8150i Administrator's Manual

Setting Up the Projector
28

Connecting Composite (RCA) Video

Before starting, make sure the projector and your video device are
turned off.
1. Connect the yellow RCA plug on one end of the RCA video cable
to the projector's
Video
to the video-out port of your video source.
2. To use the projector's built-in speaker system, connect the RCA
audio cable to the left and right Audio ports of the projector
(insert the white plug into the
port). Connect the plugs at the other end of the cable to the audio
output ports of the video source.
port. Connect the other end of the cable
RCA audio cable
RCA video cable
port and the red plug into the
L R