note
You cannot use the EMP
Link V software on a
Macintosh that doesn't have
a serial port.
Setting Up the Projector
22
Connecting the Mouse and Serial Cables
You may need to connect the mouse or serial cable in the following
situations:
If you want to use the remote control in place of your computer's
mouse, you need to connect the mouse cable as described below.
(When presenting with EasyMP.net instead of from a computer,
you don't need to use the cable.)
If you want to use the EMP Link V software on a Macintosh, or
on a Windows PC that's not connected to the network, you need
to connect the serial cable as described below.
1. Connect the round end of the main cable to the projector's
port, as shown.
Mouse/Com
Mouse/Com port
2. To use the remote control as a wireless mouse, choose the correct
mouse cable for your system:
PS/2 mouse
USB mouse
PC serial cable
main cable
PC serial mouse
Mac mouse
mouse cable