Identifying the PC to the Projector
Follow these steps to enable the projector to recognize any shared
systems on the network:
1. Turn on the projector, as described on page 36. Wait until you
see the EasyMP.net main menu screen.
If you don't see the main menu, press the
button on the projector's control panel. (You may need to press it
more than once.) You can also press the
the remote control.
2. Connect an interface device, such as a USB mouse or tablet, to the
projector as shown. If you have a USB keyboard, you may wish
connect it as well.
Comp/Easy-MP
button on
EasyMP.net
Esc
Menu
Help
Comp2/YCbCr
Comp1
Video
Capture
APPs
Auto
Resize
press to
P in P
Preset
start
- Volume +
EasyMP
note
If you don't have a USB
mouse, you can use the
projector's remote control to
point and click. If you don't
have a USB keyboard, you
can use the software
keyboard. See page 50 for
instructions.
Setting up EasyMP.net
59