note
If you have repositioned the
image or adjusted the sync
setting, you can use the
button on the remote
Auto
control to restore the default
settings.
Fine-tuning the Projector
44
Repositioning the Image
Follow these steps to fine-tune the image position:
1. Press the
button. You see the main menu.
Menu
2. Press
to select the Video menu.
Enter
3. Press
to select the
Enter
option. You see the following on the
right side of the screen:
4. Use the arrow buttons (control panel)
or the
button (remote control) to
Enter
move the image left, right, up, or down.
5. When the image is positioned the way you want, press
Adjusting Image Appearance
Follow these steps to adjust the appearance of your image:
1. Press the
button. You see the main menu.
Menu
2. Press
to select the Video menu.
Enter
3. Use the arrow buttons (control panel) or the
(remote control) to set one of the following options:
I
Brightness
Lightens or darkens the overall image.
I
Contrast
Adjusts the difference between light and dark areas.
I
Tracking (computer images only)
Removes unwanted vertical lines from a computer image by
matching the projector's internal clock to various computer
signals.
I
Sync (computer images only)
Corrects fuzziness or screen flicker by synchronizing the
projector with the tracking signal sent from the computer.
I
Color (composite video or S-Video only)
Adjusts the depth or intensity of the image.
Position
Enter
.
Esc
button