Replacing The Lamp - Epson PowerLite 8150i Administrator's Manual

note
You can check in the
projector's About menu
to see how long the
lamp has been used (see
page 80). Or you can
check from a remote
PC using Easy Menu as
described on page 65.
Maintaining and Transporting the Projector
86
Before removing the filter, make sure the projector is on its side
(not upside down) to prevent dust from falling inside. Then pull
up on the tab as shown to remove the filter.

Replacing the Lamp

The projection lamp typically lasts for about 2000 hours of use. It is
time to replace the lamp when:
The projected images get darker or start to deteriorate.
The projection lamp light is flashing red or orange.
The message
LAMP REPLACE
projector lamp comes on (after about 1900 hours of use). To
maintain projector brightness and image quality, replace the lamp
as soon as possible.
Contact your dealer or call EPSON at (800) 873-7766 in the United
States and Canada for a replacement lamp. Request part number
.
ELPLP11
appears on the screen when the