Epson PowerLite 8150i Administrator's Manual page 101

The colors of the image are not right.
The color balance may be incorrect. If you're displaying a
computer image, use the
menu to adjust the balance of red, green, and blue. If you're
displaying video, adjust the
the Video menu. Also try adjusting the
the Advanced menu.
Check your computer display settings to correct the color balance.
There is no sound.
Try turning up the volume. Hold down the
press the right side of the
the right side of the
Make sure the
A/V Mute
If you're using a VCR or other video source, make sure the
volume is not turned all the way down or muted. Also, make sure
the cables are connected correctly, as described in Chapter 1.
If your presentation includes computer audio, make sure the
volume control on your computer is not turned all the way down
or muted. Make sure the audio cable is securely connected to both
the projector and your computer's
audio out jack. See page 24.
Make sure the Windows volume controls on your computer are
not turned all the way down or set to Mute. You may be able to
check this by right-clicking the sound icon on your Windows
desktop.
The wrong source may be selected. Press the
button on the control panel—or the
Video
,
Comp2/YCbCr Easy-MP
control—to select the proper source. Allow a few seconds for the
projector to sync up after pressing the button.
option in the projector's Video
Gamma
, , and
Color Tint
Color Setting
button (control panel) or press
Volume
button (remote control).
Volume
button is not enabled.
headphone jack or
, or button on the remote
Video
settings on
Gamma
option in
button and
Shift
or
Comp/Easy-MP
,
Comp1
note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your laptop or computer
monitor.
Solving Problems
99