Connecting To The Network; Inserting The Memory Card - Epson PowerLite 8150i Administrator's Manual
Epson administrator's manual multimedia projector powerlite 8150i
Hide thumbs
Also See for PowerLite 8150i:
- User manual (83 pages) ,
- Product information (13 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Setting Up the Projector
32
software needs to be on the network, but if it's equipped with a
wireless Ethernet card, the user won't have to worry about connecting
any cables.
Connecting to the Network
Once your network is set up, connect the projector to it using a
standard (Category 5 UTP) network cable. Plug the cable into the
RJ45 connector on the back of the projector as shown.
Inserting the Memory Card
Before sending presentations to the projector, you need to install a
memory card. You can use any of the following cards:
CompactFlash (you'll need to use the card adapter included with
the projector)
ATA flash card
ATA HDD card
The projector comes with a 16-megabyte memory card, but you can
use any size of card that's available. Bear in mind that a typical
®
PowerPoint
presentation may be 4 or 5 megabytes in size. Since
more than one presentation may be loaded on the card at a time, be
sure to install a card that's large enough for your users.
Advertisement
Table of Contents
