Adjusting The Image; Repositioning The Image - Epson PowerLite 500c User Manual Supplement

note
Slightly different settings are
available on the Video menu
when you're projecting from
a video source, rather than
from your computer. You
can also adjust video settings
from the projector's help
system.
Fine-Tuning Your Projector
48
6. If you want to go back to the default settings on any menu,
select , press
Reset
7. Press the button on the remote to go back to the main
Esc
menu display. Your changes are saved automatically.
8. Press the button to exit the menu system.
Menu

Adjusting the Image

You can adjust a number of image features with the Video
menu, including:
Image positioning
Brightness
Contrast
Color Balance
Sharpness
Gamma
Additional settings are available on the Video menu for
tracking, sync, and auto setup. Normally you won't need to
change these settings unless you have a problem with your
projector. See the User's Guide Supplement for more
information.

Repositioning the Image

Follow these steps to fine-tune the image position:
1. Press the button. You see the main menu listing,
Menu
with the Video menu highlighted (as shown on page 47).
2. Press to select the Video menu.
Enter
, select , and then press
Enter Yes
.
Enter