3. Connect one end of the mouse cable to the
the square end of the main cable.
4. Connect the other end of the mouse cable to the mouse port (or
USB port) on your computer.
5. To use the EMP Link V software, follow the steps below for your
system:
On a PC, connect one end of the PC serial cable to the
terminal on the main cable.
SERIAL
Connect the other end of the serial cable to the serial port on
the back of your computer.
On a Macintosh, connect one end of the Mac serial cable to
the
MAC SERIAL
Connect the other end of the Mac serial cable to the
printer or
Macintosh.
6. Tighten the screws on the connectors.
MOUSE
terminal on the main cable.
modem port on the back of your
terminal on
note
You won't be able to make
this connection if your
computer has only one serial
port that is being used to
support a serial mouse. But
you can still use EMP Link V
if the projector and computer
are connected to your
network.
Setting Up the Projector
23