About" Menu - Epson EMP-52 User Manual

Using the Configuration Menu Functions

"About" Menu

• The "About" menu shows the setting details for the current image source.
• The "Lamp" item appears as 0H for 0–10 hours, and after that, it appears in
units of 1 hour.
Computer/RGB video/
Component video
(Analogue-RGB, YCbCr , YPbPr )
Video Lamp
Audio
Reset Lamp Timer
Setting
Video Source
Advanced Input Signal
About
Frequency
Reset All
SYNC Polarity
SYNC Mode
Resolution
Refresh Rate
: Select : Enter
Sub-menu
Lamp Displays the cumulative lamp operating time.
• When the lamp warning period is reached, the display
Reset Lamp Initialises the lamp operating time. When this command
Timer is selected, the cumulative lamp operating time is reset to
the initial default value.
Video Source Displays the input source which is currently being
projected.
Input Signal Displays the input signal settings.
(Does not appear when the input source is composite
video or S-Video.)
Video Signal Shows the video signal format.
(Does not appear when the input source is computer,
component video or RGB video.)
Frequency Displays the horizontal and vertical scanning frequencies.
(Does not appear when the input source is composite
video or S-Video.)
SYNC Displays the sync polarity.
Polarity (Does not appear when the input source is composite
video or S-Video.)
: 0H
Execute
: Computer
: RGB
: H ---.--kHz
V ---.--Hz
: H ------
V ------
: ------
: --- x---
: ---.--Hz
characters appear in red.
Video (S-Video, Composite video)
Video Lamp
Audio
Reset Lamp Timer
Setting
Video Source
Advanced Video Signal
About
Reset All
: Select : Enter
Function
54
: 0H
Execute
: Video
: Auto (----)
Default
0H
-
-
-
-