About" Menu - Epson EMP-7850 User Manual

Using the Configuration Menu Functions Using the Configuration Menu Functions

"About" Menu

• The "About" menu shows the setting details for the
current input signal.
• The "Lamp" item appears as "0H" for 0–10 hours, and
after that it appears in units of 1 hour.
Computer (Analogue RGB, Digital-RGB)/
Component Video (YCbCr
RGB Video
Video Video Lamp
Audio Audio Reset Lamp Timer
Effect Effect Source
Setting Setting
Input Signal
User's Logo User's Logo
Frequency
Advanced1 Advanced1
Advanced2 Advanced2
SYNC Polarity
About About
Reset All Reset All
SYNC Mode
Resolution
Refresh Rate
[ ]: Select [ ]: Enter
Video (Composite Video
Video Video Lamp
Audio Audio
Reset Lamp Timer
Effect Effect Source
Setting Setting
Video Signal
User's Logo User's Logo
Advanced1 Advanced1
Advanced2 Advanced2
About About
Reset All Reset All
[ ]: Select [ ]: Enter
, YPbPr )/
: 0H
Execute
: Computer1
: Analog-RGB
: H ---.---kHz
: V ---.---Hz
: H ------
: V ------
: ------
: ----x ----
: ---.-- Hz
[Menu]: Exit
, S-Video )
: 0H
Execute
: Video
: Auto( )
[Menu]: Exit
EasyMP
Video Video Lamp :
Audio Audio Reset Lamp Timer
Effect Effect Source : EasyMP
Setting Setting
Frequency : H ---.---kHz
User's Logo User's Logo
: V ---.---Hz V ---.---Hz
Advanced1 Advanced1
SYNC Polarity : H ------
Advanced2 Advanced2 : V ------
About About
SYNC Mode : ------
Reset All Reset All
Resolution : ----x
Refresh Rate : ---.-- Hz
[ ]: Select [ ]: Enter
Sub-menu
Lamp Displays the cumulative lamp operating time.
•When the lamp warning period is reached, the display
characters appear in red.
Reset Initialises the lamp operating time. When this command is
Lamp selected, the cumulative lamp operating time is reset to the
Timer initial default value.
Source Displays the input source which is currently being
projected.
Input Displays the input signal settings.
Signal (Does not appear when the input source is composite video,
S-video, or EasyMP.)
Video Shows the video signal format.
Signal (Does not appear when the input source is a computer,
component video, RGB video, or EasyMP.)
Frequency Displays the horizontal and vertical scanning frequencies.
(Does not appear when the input source is composite video
or S-video.)
SYNC Displays the sync polarity.
Polarity (Does not appear when the input source is composite video
or S-video.)
0H
Execute
----
[Menu]: Exit
Function
EMP-7850 User's Guide
90
Default
0H
-
-
-
-